Winshuttle Function Module compatibility matrix
Studio Products
Starting with version 10.2, all client products (Transaction, Query, and Direct) in the 10.x series are forward-compatible and backward-compatible.
Designer is forward-compatible and backward-compatible starting with 10.5.
Example:
- Forward compatibility: 10.3 client is compatible with 10.5 Server products.
- Backward compatibility: 10.3 client is compatible with 10.2 Server products.
Important: New Foundation functionality is not available in the client if the client version is older than the version of the server-side products you are using.
SAP Function Modules
The client software must be either the same version or a later version of the Function Module (FM) in order to run. WFM v10.7 is an exception to this; it runs successfully with client software versions 10.6 and 10.6.1.
Example: If you have the 10.5 TFM installed, your Transaction products need to be version 10.5 or later.
Prior to combined WFM installer
| Transaction client & Winshuttle Server version | ||||||||
| 10.3 | 10.4 | 10.4.1 | 10.5 | 10.6 | 10.6.1 | 10.7 | ||
| Transaction WFM version |
10.3 | Yes | Yes* | Yes* | Yes* | Yes* | Yes* | Yes* |
| 10.4 | - | Yes | Yes* | Yes* | Yes* | Yes* | Yes* | |
| 10.4.1 | - | - | Yes | Yes* | Yes* | Yes* | Yes* | |
| 10.5 | - | - | - | Yes | Yes | Yes | Yes | |
| 10.6 | - | - | - | - | Yes | Yes | Yes | |
| 10.7 | - | - | - | - | Yes | Yes | Yes | |
Yes - Supported. To get full benefits of a release (co-dependent new features and SAP Enhancement Packs), client and FM must be the same version.
Yes* - Supported, but not recommended because of core WFM changes.
- Not supported.
| Query client & Winshuttle Server version | ||||||||
| 10.3 | 10.4 | 10.4.1 | 10.5 | 10.6 | 10.6.1 | 10.7 | ||
| Query WFM version | 10.3 | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 10.4 | - | Yes | Yes | Yes | Yes | Yes | Yes | |
| 10.5 | - | - | - | Yes | Yes | Yes | Yes | |
| 10.6 | - | - | - | - | Yes | Yes | Yes | |
| 10.7 | - | - | - | - | Yes | Yes | Yes | |
Yes - Supported. To get full benefits of a release (co-dependent new features and SAP Enhancement Packs), client and FM must be the same version.
- Not supported.
After combined WFM installer (WFM version 10.6 and later)
| WFM version | Transaction/Query client version | Studio client version | |||||||
| 10.6 10.6.1 |
10.7 10.7.1 10.7.3 |
11.0 11.0.1 11.0.3 |
11.1.1 | 11.2.0 | 11.3.0 | 11.4.0 11.4.1 |
11.2.12 | 12.0 12.0.1 12.1 |
|
| 10.6 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 10.7 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 10.7.2.1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 11.0 11.0.1 |
Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 11.1.1 | Yes | Yes | Yes | Yes | - | Yes | Yes | Yes | Yes |
| 11.2.0 11.3.0 |
Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 11.4.0 |
Yes | Yes | Yes | Yes | Yes | Yes | Yes | - | Yes |
| 11.4.1 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 11.2.12 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| 12.0 12.0.1 12.1 |
Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Yes - Supported. To get full benefits of a release (co-dependent new features), client and FM should be the same version.
- Not supported.
Notes:
EHP-7 Support is provided for WFM 10.7 and above, and for Winshuttle software client version 10.7 and above.
EHP-8 Support is provided for WFM 11.1.1 and above, and for Winshuttle software client version 11.1.1 and above.
If you plan to use Winshuttle Studio with S/4 HANA, the minimum compatible Studio + WFM versions are as follows:
1511: None /No GA version
1610 : v11.2
1709 : v11.4 and v11.2.12
1809 : v12.0 and 12.0.1
Studio v10.x and older Studio versions may work but are not recommended.
Appearance in SAP GUI
| SAP Basis Release |
SAP 4.6C |
SAP 470 |
ECC5 |
ECC6 - 710 or 711 |
ECC6 - 730 |
ECC6-70x, 731 or 740 |
ECC6-70x, 731 or 740 for APO/ SRM/EWM |
EHP8 -SAP 750 |
S/4HANA |
S/4HANA 1610 - |
S/4HANA 1709 - SAP 752 |
S/4HANA 1809 - SAP 753 | |
| WFM version | 10.6 | - | 30I | 20J | 40A | 70B |
10J |
- | - | - | - | - | - |
| 10.7 | - | 30J | 20K | 40B | 70C | 10K | - | - | - | - | - | - | |
| 10.7.2.1 | - | 30J | 20K | 40B | 70C | 10K | - | - | - | - | - | - | |
|
11.0 |
- | 30K | 20L | 40C | 70D | 10L | - | - | 60L* | - | - | - | |
|
11.0.1 |
- | 30K | 20L | 40C | 70D | 10L | 90L | - | - | - | - | - | |
|
11.1.0 |
- | 30L | 20M | 40D | 70E | 10M | - | - | - | - | - | - | |
|
11.1.1 |
- | 30M | 20N | 40E | 70F | 10N | 90M | 10N** | 60M* | - | - | - | |
|
11.2.0 |
- | 30N | 20O | 40F | 70G | 10O | 90N | 10O** | 60N* | 65A | - | - | |
|
11.3.0 |
- | 30O | 20P | 40G | 70H | 10P | 90O | 10P** | 60O* | 65B | - | - | |
|
11.4.0 |
- | 30P | - | 40H | 70I | 10R | 90P | 10R** | - | 65C | 66A* | - | |
| 11.2.12 | - | 30Q | - | 40I | 70J | 10S | 90Q | 10S** | - | 65D | 66B | - | |
|
11.4.1 |
- | 30R | - | 40J | 70K | 10T | 90R | 10T** | - | 65E | 66C | - | |
|
12.0 |
- | - | - | 40K | 70L | 10U | 90S | 10U** | - | 65F | 66D | Yes | |
| 12.0.1 | - | - | - | Yes | Yes | Yes | Yes | Yes | - | Yes | Yes | Yes | |
Specific figure/Yes - Supported.
- Not supported.
Notes:
* Non-GA version WFM: Installers are not fully tested by Winshuttle.
** Installer created for ECC6 - 70X, 731, or 740 will be used for BASIS 750.
SAP 4.6C is not supported by Winshuttle Function Module versions 11.x and 12.x.